Made for exactly one tablet. Yours.
from €29.99
incl. VAT · free DHL shipping
One shape per model
Made in Germany
Free DHL shipping
14-day returns
Not sure which model you have?
To the model finder →
From model to made-to-measure shape
Choose model
You choose your tablet. We only show you mounts that are made for exactly that model.
Have it made
Your mount is made in our own production in Germany - precisely in the shape that belongs to your model.
Install
Onto the wall with the included screws and universal wall plugs, in portrait or landscape orientation. Your charging cable runs concealed inside.
Choose your tablet model and buy your precisely fitted mount right here.
1 · Your tablet
You will find the model name under Settings → About · Zum Modellfinder →
Tippe auf deine Marke - danach wählst du Serie und Modell.
Prefer to browse?
All mounts for all 10 device series at a glance.
Your tablet can do more than lie on the table.
From smart home hub to recipes in the kitchen: three places where your tablet becomes a fixed installation.
Smart Home
Your tablet as a central control panel for lights, heating and cameras, for example with Home Assistant or ioBroker. Display and front camera remain fully usable.
Kitchen
Recipes, timers and your shopping list at eye level. Thanks to the slide-in design, the tablet is out in seconds.
Practices and reception
Check-in, appointment display or feedback terminal. The screwed-on frame covers the buttons and helps avoid accidental inputs.
MADE IN GERMANY
A dedicated shape for every model
We develop every mount ourselves and check it against the original devices. This creates a dedicated shape for every tablet model with a millimeter-precise fit - display and front camera remain uncovered, and you route the charging cable concealed through the side cutout. It is produced using additive manufacturing, better known as 3D printing, in our own production in Germany. Only this process makes the model-specific shape possible, instead of a universal mount with clamps and springs. That is why your tablet sits flush against the wall.
300+
model variants in the range
10
device series, for tablets from Apple to Honor
≤ 1 mm
fit accuracy per model shape
100 %
in-house production in Germany
Production
design
shipping
Frequently asked questions
Answers about fit, installation and material
Does the mount really fit my tablet exactly?
Yes. Each mount is made for a specific tablet model - display and front camera remain uncovered, and the charging cable runs through the side cutout. You choose your model in the configurator, and we produce the matching shape. The model finder helps you determine your model with certainty. If you have questions about the fit, you can reach us before ordering at info@cleverstation.de.
What does shipping cost and how fast is delivery?
Shipping is free and handled by DHL from Germany. We dispatch within 2 working days of receiving your order; delivery within Germany then usually takes 1-3 working days, within the EU usually 4-5 working days.
How is the mount installed?
With the included 4 screws and 4 universal wall plugs directly on the wall, in portrait or landscape orientation. The enclosure version additionally comes with the screws for the frame. The back is also VESA 100x100 compatible.
Can I use the buttons while the tablet is in the mount?
With the slide-in mount, you can take the tablet out at any time - all buttons remain accessible. The screwed-on enclosure mount deliberately has no cutout for the side buttons: the frame covers them and thus helps prevent unauthorized access and accidental inputs. You operate the tablet via the display - on older iPads, the home button on the front also remains accessible.
Can I charge the tablet on the wall?
Yes. You route the charging cable concealed through the side cutout (up to approx. 5 mm cable diameter) or the integrated cable channel (approx. 2 cm wide) - the mount covers a standard flush-mounted wall box. We recommend an angled cable (not included). Wireless charging is not integrated.
What material is the mount made of?
Each mount is 3D printed from sturdy plastic. Fine layer lines on the surface are typical of the material. They appear because your mount is produced in its own model-specific shape rather than coming from a mass-production mold. You should avoid direct heat, for example above a radiator.
What if the mount does not fit?
You have a statutory 14-day right of withdrawal. If you have questions about the fit, feel free to write to us in advance at info@cleverstation.de.