Installation is done in a few steps. Screws and universal wall plugs come with every mount. Depending on your wall material (e.g. cavity or special walls), check whether the included universal wall plugs are suitable.
Guide
Installing a Tablet Wall Mount: Step by Step
1. Find the position
Choose the height so that the display is comfortable to read and operate - as a rule of thumb, standing eye level works well for control panels, a little lower for the kitchen. Decide in advance whether your tablet should hang in portrait or landscape orientation: both are possible.
2. Plan the power supply
The charging cable runs concealed inside the mount. Installation looks cleanest directly above a wall socket. We recommend an angled cable (not included). Wireless charging is not integrated.
3. Drill and screw
Mark the drill holes with a spirit level, drill and insert the included universal wall plugs (or, for special walls, wall plugs suited to your wall material). Then screw the mount on with the included screws. The back is also VESA 100 x 100 compatible in case you want to use an existing VESA fixture.
4. Insert the tablet
With the slide-in mount, you slide the tablet in from the side. With the enclosure mount, you insert it and screw on the cover. With the picture frame mount, you insert the tablet like a picture: it sits behind a passepartout and frame, and you attach the frame with the included screws. Display and front camera remain fully usable with all variants.
No mount yet? To the configurator →
You will find suitable mounts in the overview tablet wall mounts. How the charging cable reaches the wall discreetly is covered in the guide Tablet Wall Mount with Charging. You can identify your exact model with the model finder.